Product series

Product series >  Text

CAT7 outdoor CPE 4x4MIMO/2CA

Updated:2020-05-24Clicks:7995Font Size:T|T

JATONTEC 6300D is highly advanced TD-LTE CAT7 outdoor data unit specially designed to meet the most challenging demands of todays high speed wireless backhaul and fixed wireless access deployments by the 4G service operators. The unit can support multiple

JATONTEC 6300D is highly advanced TD-LTE CAT7 outdoor data unit specially designed to meet the most challenging demands of today’s high speed wireless backhaul and fixed wireless access deployments by the 4G service operators. The unit can support multiple TDD band operations. Multiple operator network support can also be provisioned on the unit to allow the deployment across entire country with different operators


JT6300D provides Gigabit PoE connection to connect user terminal device such as router or Wi-Fi AP products. The unit PoE interface can also work with standard PoE switches or router products. The product comes with PoE power adapter and mounting bracket accessories for quick self-installation.


 Key Benefits

Cost effective & compact design with built-in LTE MIMO antennas.
Compliant to 3GPP LTE Release10
Advanced 2x2 MIMO, DL & UL CA, and UL QAM64 support (CAT7)
Router and bridge operation mode support
Support L2TPV3,PPTP and GRE VPN Tunneling clients 
Support secure Telnet, FTP, HTTP and TR069 remote OTA management
Support IPv4&IPv6 and Multiple PDN 


JT6300D is designed to meet the stringent operation environment for outdoor CPE devices. The device can safely operate in a wide temperature ranging from -40 to +55 degree and meets industrial IP67 water and dust proof standard requirements. The device MTBF time is expected to be above 80,000 hours. Depending on the network configuration and DL/UL split ratio configuration, the unit can provide up to 300Mbps max throughput over the air. The typical coverage should be more than 15km with reasonable good throughput performance.


JT6300D is a user-friendly LTE CPE that is easy to install and maintain. The unit is fully integrated and comes with all the necessary device drivers pre-loaded. Subscribers just connect the device to their computer or home switch/router and the device is ready to offer an experience of surfing over Internet. The LEDs on the JT6300D  have also been designed for user convenience, and offer a clear sign of what the device is doing. The IP addresses can be dynamically obtained via DHCP.


JT6300D offers rich management features which facilitate the task of carrier. It supports local management access, Telnet, Http, Https and standard TR069 remote OTA management including device configuration, monitoring, and upgrades management


JT6300D design is based on the standard implementation of LTE release10 specification. It is able to meet the most demanding requirements of large service providers with high throughput and availability.JT6300D is a CAT7 CPE and supports advance features such as 2x2 MIMO, Carrier Aggregation, QAM64 modulation on the uplink.


With high gain directional patch antenna.JT6300D enables a longer reception range from the base station. This yields more efficient use of the network with a larger cell reach, guaranteed carrier class service, and customer service probability. Advanced Orthogonal Frequency Division Multiplexing (OFDM) modulation enhances performance in non-line-of-sight (NLOS) conditions to ensure immunity to interference and multi-path conflicts typical of deployments in densely populated urban areas. Moreover, sophisticated QoS capabilities ensure true end-to-end QoS and support high quality data services.



Radio Access : 3GPP Release 10, Category 7
Operation Mode : FDD/TDD
Frequency Band : B7/B38/B40/B41, B42/B43/B48
Channel BW : 5/10/20MHz and CA support
MIMO Support : 2Tx 4Rx, or 2Tx 2Rx,
                          DL 4*4 MIMO, UL 2*2 MIMO QAM64

                          DL 2*2 MIMO CA(2CC), UL 2*2 MIMO QAM64

Max Tx Power : 23dBm per antenna port
Antenna Gain B7/38/40/41: 14dBi(2*2 CA), 10dBi(4*4 MIMO)

                      B42/43/48: 17dBi(2*2 CA), 13dBi(4*4 MIMO)


Power DC : 48V/0.5A PoE <15W (Gigabit PoE)

Weight :      <2.5Kg

Dimensions :  250mm (L) * 250mm(W) * 75mm(D)

Environment : Operating Temperature, -40℃~55℃.

                          Humidity, 95% max Non-condensing

Water Protection : IP 67


Data Interface : 1 RJ45 10/100/1000M ETH Port

LED Indicator :  PWR, SYS, NET, SIM, ETH, RF

                            (5 Signal intensity LEDs)

SIM Card :          Single SIM card slot (2FF)


Network configuration:

DHCP or Static IP address Assignment

Bridge and Router Operation Support

Built-in DHCP Server for LAN Devices

IPv4, IPv6 DS-Lite Support

Multiple PDN interface support

NTP Service Support

SIM card locking feature

Network selection and cell locking provision  


Data Networking Features:

VPN Pass-through support (PPTP, L2TPV3 & IPsec) 

Built-in L2TPV3 & GRE Tunneling Clients

Firewall & Access Control

DMZ and Virtual Server Support

IP and Port Filtering Support 

Local and Remote Management Restriction

Application Firewall Support 

LAN Device Access Control