Product series

Product series >  Text

LTE-A CAT7 outdoor CPE CA (2CC)

Updated:2018-05-16Clicks:633Font Size:T|T

JATONTEC 4300P is a cost effective TD-LTE CAT7 outdoor CPE specially designed to meet the most challenging demands of todays high speed wireless backhaul and fixed wireless access deployments by the 4G service operators. The unit can support multiple TDD



 JATONTEC 4300P is a cost effective TD-LTE CAT7 outdoor CPE specially designed to meet the most challenging demands of today’s high speed wireless backhaul and fixed wireless access deployments by the 4G service operators. The unit can support multiple TDD band operations. Multiple operator network support can also be provisioned on the unit to allow the deployment across entire country with different operators.

 

JT4300P provides Gigabit PoE connection to connect user terminal device such as router or Wi-Fi AP products. The unit PoE interface can also work with standard PoE switches or router products. The product comes with PoE power adapter and mounting bracket accessories for quick self-installation.


RELIABLE PERFORMANCE

 

JT4300P is designed to meet the stringent operation environment for outdoor  CPE devices. The device can safely operate in a wide temperature ranging from -40 to +55 degree and meets industrial IP67 water and dust proof standard requirements. The device MTBF time is expected to be above 80,000 hours. Depending on the network configuration and DL/UL split ratio configuration, the unit can provide up to 300Mbps max throughput over  the air. The typical coverage should be more than 15km with reasonable good throughput performance.

 

EASY USAGE & MANAGEMENT

 

JT4300P is a user-friendly LTE CPE that is easy to install and maintain. The unit is fully integrated and comes with all the necessary device drivers pre-loaded. Subscribers just connect the device to their computer or home switch/router and the device is ready to offer an experience of surfing over Internet. The LEDs on the JT4300P have also been designed for user convenience, and offer a clear sign of what the device is doing. The IP  addresses can be dynamically obtained via DHCP. 

 

JT4300P offers rich management features which facilitate the task of carrier. It supports local management access, Telnet, Http, Https and standard TR069 remote OTA management including device configuration, monitoring, and upgrades management.
 

TECHNICAL FEATURES

 

JT4300P design is based on the standard implementation of LTE release 10 specification. It is able to meet the most demanding requirements of large service providers with high throughput and availability. JT4300P is a CAT7 CPE and supports advance features such as 2x2 MIMO, Carrier Aggregation, QAM64 modulation on the uplink.

 

With high gain directional patch antenna, JT4300P enables a longer reception range from the base station. This yields more efficient use of the network with a larger cell reach, guaranteed carrier class service, and customer service probability. Advanced Orthogonal Frequency Division Multiplexing (OFDM) modulation enhances performance in non-line-of-sight (NLOS) conditions to ensure immunity to interference and multi-path conflicts typical of deployments in densely populated urban areas. Moreover, sophisticated QoS capabilities ensure true end-to-end QoS and support high quality data services. 

 LTE Radio Interface
Radio Access : 3GPP E-UTLA Release 10,CAT7
Operation Mode : 4Rx, 2Tx, DL 2*2 MIMO

                                    DL & UL CA (2CC)

                                    DL MIMO, UL QAM64

Frequency Band : B7, B38, B40, B41, B42/43

                                     B55 (3.3-3.4GHz)

Output Power : 23 dBm
Antenna Gain

      11±1 dBi (B7, B38, B40, B41)

      13±1 dBi (B42, B43, B55) 


User
Interfaces

Data Interface : 1 RJ45 (10/100Mbps, 24V PoE)
LED Indicator : SYS, SIM, ETH, RF(4)
SIM Support   : SIM Card Slot (2FF)

PHYSICAL & ENVIRONMENTAL

 

Power DC : 24V/0.75A DC (Passive PoE)

Power Consumption: < 12W

Weight :      <1.5Kg

Dimensions :  300mm x 120 mm x 75mm

Environment : Operating Temperature, -40℃~55℃

                          Storage Temperature, -30~85℃

                          Humidity, 90% max Non-condensing

Water Protection : IP 67


Networking
Configuration

 

lBridge and Router Operation Support
lBuilt-in DHCP Server for LAN Devices
lIPv4, IPv6 DS-Lite Support
lMultiple PDN interface support
lNTP Service Support


Data
Networking Features

 

lVPN Pass-through support (PPTP, L2TPV3 & IPsec)
lBuilt-in L2TPV3 & GRE Client Support
lFirewall & Access Control
lDMZ and Virtual Server Support
lIP and Port Filtering Support
lLocal and Remote Management Restriction
lApplication Firewall Support

 

lLAN Device Access Control

Device 
Management

 

lCLI, Telnet and WEB Management Interfaces
lStandard TR-069 Management
lDevice Factory Default Setting
lDual Image Bank for Safe Upgrade