Product series

Product series >  Text

5GHz LTE-U B46 Outdoor CPE

Updated:2018-11-12Clicks:743Font Size:T|T

JATONTEC 4300P is a cost-effective LTE CAT7 outdoor CPE specially designed to meet the most challenging demands of todays high speed wireless backhaul and fixed wireless access deployments by the 4G service operators. JT4300P provides Gigabit PoE connecti



JATONTEC 4300P is a cost-effective LTE CAT7 outdoor CPE specially designed to meet the most challenging demands of today’s high speed wireless backhaul and fixed wireless access deployments by the 4G service operators.

JT4300P provides Gigabit PoE connection to connect user terminal device such as router or Wi-Fi AP products. The unit PoE interface can also work with standard PoE switches or router products.  The product comes with PoE power adapter and mounting bracket accessories for quick self-installation. 


Key Benefits

Cost effective & compact design with built-in high gain LTE patch antenna
Compliant to 3GPP LTE R10 specifications
Advanced 2x2 MIMO support, CA and optional UL QAM64 support
IPv4 & IPv6, Multiple PDN Interface Support
Router, bridge and by-pass networking
VPN & full L2/L3 GRE Tunneling clients support
FTP, HTTP,HTTPS and TR-069 management support
SIM card authentication and virtual SIM support
Standard or Passive 48V PoE support

 



RELIABLE PERFORMANCE

JT
4300P is designed to meet the stringent operation environment for outdoor CPE devices. The device can safely operate in a wide temperature ranging from -40 to +55 degree and meets industrial IP67 water and dust proof standard requirements. The device MTBF time is expected to be above 80,000 hours. Depending on the network configuration and DL/UL split ratio configuration, the unit can provide up to 300Mbps max throughput over the air. 


EASY
USAGE & MANAGEMENT 
JT4300P
is a user-friendly LTE CPE that is easy to install and maintain. The unit is fully integrated and comes with all the necessary device drivers pre-loaded. Subscribers just connect the device to their computer or home switch/router and the device is ready to offer an experience of surfing over Internet. The LEDs on the JT4300P have also been designed for user convenience, and offer a clear sign of what the device is doing. The IP addresses can be dynamically obtained via DHCP.
JT4300P
offers rich management features which facilitate the task of carrier. It supports local management access, Telnet, Http, Https and standard TR069 remote OTA management including device configuration, monitoring, and upgrades management.


TECHNICAL
FEATURES
JT4300P
design is based on the standard implementation of LTE release 10 specification. It is able to meet the most demanding requirements of large service providers with high throughput and availability.
JT4300P
is a CAT7 CPE and supports advance features such as 2x2 MIMO, Carrier Aggregation, QAM64 modulation on the uplink.   
With
high gain directional patch antenna, JT4300P enables a longer reception range from the base station. This yields more efficient use of the network with a larger cell reach, guaranteed carrier class service, and customer service probability. Advanced Orthogonal Frequency Division Multiplexing (OFDM) modulation enhances performance in non-line-of-sight (NLOS) conditions to ensure immunity to interference and multi-path conflicts typical of deployments in densely populated urban areas. Moreover, sophisticated QoS capabilities ensure true end-to-end QoS and support high quality data services.The currently supported frequency band are B46 5150-5925MHz.


LTE Radio Interface

Radio Access : 3GPP E-UTLA Release 10,CAT7
Operation Mode : 2Rx, 2Tx, 2*2 MIMO                                     

                                    DL & UL CA                                             

                                    DL MIMO, UL QAM64 
Frequency Band : B46 5150-5925MHz

Output Power : 23 dBm
Antenna Gain : 2*2 MIMO CA: 15dBi

 
User
Interfaces

Data Interface : 1 RJ45 (Gigabit PoE)
LED Indicator : SYS, SIM, ETH, RF(4)
SIM Support   : SIM Card Slot (2FF)


Networking
Configuration 

Bridge and Router Operation Support
Built-in DHCP Server for LAN Devices
IPv4, IPv6 DS-Lite Support
Multiple PDN interface support
NTP Service Support


Data
Networking Features 

VPN Pass-through support (PPTP, L2TP & IPsec)
Built-in L2TP & GRE Client Support
Firewall & Access Control
DMZ and Virtual Server Support
IP and Port Filtering Support
Local and Remote Management Restriction
Application Firewall Support
LAN Device Access Control


Device
Management

CLI, Telnet and WEB Management Interfaces
Standard TR-069 Management
Device Factory Default Setting
Dual Image Bank for Safe Upgrade


Industry
Standards  

ITU : 3GPP    Release 10

IEEE : IEEE 802.3  10Base Ethernet

            IEEE 802.3u  Fast Ethernet

OTHERS: Water Resistance IP67

                  Safety   FCC or CE 


PHYSICAL &
ENVIRONMENTAL 

Power DC : 48V/0.5A DC (Gigabit PoE)

Power Consumption: < 12W

Weight :      <1.5Kg

Dimensions :  300mm x 120 mm x 75mm

Environment : Operating Temperature, -40℃~55℃

                          Storage Temperature, -30~85℃

                          Humidity, 90% max Non-condensing